Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • Replies 35 replies
  • Subscribers 39 subscribers
  • Views 8254 views
  • Users 0 members are here
Options
You may also be interested in

Public Consultation: PAS 63100 Electrical installations – Protection against fire of battery energy storage systems for use in dwellings – Specification

gkenyon

The Draft of the new PAS 63100 standard for protection against fire of battery energy storage systems for use in dwellings is now available for public comment on BSI’s Standards Development web-site.

The public commenting period commences 26 June 2023, and on closes on 24 July 2023.

This topic is directly related to domestic storage installations accordance with BS 7671 and the IET Code of Practice for Electrical Energy Storage Systems.

Parents

  • No need for this, just a requirement for a bunded reinforced seperate building at the side of the house for battery storage. Keep it well way from the main dwelling and there's no need for a separate wiring standard.

  • in reply to whjohnson

    That would mean that a lot of people wouldn't be able to have it though. Not everyone has the space for a separate building. I have seen a couple locally where the batteries has been put in the roof space. I only know that as i was asked to install a mains linked smoke detector in there so i presume that is already a requirement.

    Gary

  • in reply to whjohnson
    whjohnson said:
    no need for a separate wiring standard.

    It's not a "wiring standard". BS 7671 is referred to as the main electrical installation standard.

    Worth a read as to what the draft provides for.

  • in reply to aligarjon
    aligarjon said:
    I have seen a couple locally where the batteries has been put in the roof space.

    Some I've seen, are actually just monobloc batteries (equivalent to a car battery, perhaps with shrouded connectors, but all the same ...)  placed in the loft or on the floor of a garage, with a simple gG-type fuse carrier on the wall under the inverter (no real adequate overcurrent protection within the "free to move" monoblocs close by).

    Just imagine an inquisitive child opening a gG fuseholder on-load (and drawing a beautiful DC arc), for example.

  • in reply to gkenyon

    To be fair the ones i have seen were in big metal cabinets so looked a pretty good install.

Reply Children
No Data

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines