Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • Replies 11 replies
  • Subscribers 35 subscribers
  • Views 1742 views
  • Users 0 members are here
Options
You may also be interested in

Oversized BS1363 plug body safety problem

Foffer

I have purchased an electric smoker BBQ rated at 2800W made by a household name brand which is intended to be used outdoors.  It is fitted with a 1.5m lead incorporating a 10mA RCD which is included within an enlarged plug body.  The instructions and the label on the lead state that it must only be plugged into a socket or extension lead suitable for outdoor use.   The problem I have is that the elongated plug on the appliance will not fit into any type of outdoor socket I can find.  These sockets are usually made so that the lid can be closed over an installed plug the design of which means the socket is slightly recessed within the body, leaving a raised edge.  This stops the pins of the elongated RCD plug from being able reach the socket, even with the lid open.

I have found a work-around by using an adaptor plug as a spacer between the outdoor socket and the RCD plug. Not ideal, but if anyone has any better suggestion I'd like to hear it.  All my property is RCD protected so I could cut the RCD plug off and fit a standard plug but then the warranty could be compromised.   

I have written to the manufacturer but haven't had any response yet.

How have we ended up with so many different sized plug bodies?  Some prevent the second socket being used in a double outlet, some prevent the on/off switch being used and as in this case won't fit in an outdoor socket.

Are there any regs regarding the compatibility of all BS1363 sockets and plugs, if not should there be?

Parents

  • A neat solution to power supplies transformers built into plugs  and so on can be the  drybox approach

    Example here.

    https://www.festive-lights.com/dribox-weatherproof-connection-box-black-and-green

    At work we have used milspec versions by performing the same tricks with pelicases, though I suspect that will cost more than the BBQ.

    I do quite often find myself thinking that we need to permit/encourage a more outdoorsy plug in the UK for domestic garden use. The square pin is all very well in the dry, but the mating plane has no water break. Perhaps a version of the old BS4343 with earth pin operated shutters would be worth inventing.

    Mike.

Reply

  • A neat solution to power supplies transformers built into plugs  and so on can be the  drybox approach

    Example here.

    https://www.festive-lights.com/dribox-weatherproof-connection-box-black-and-green

    At work we have used milspec versions by performing the same tricks with pelicases, though I suspect that will cost more than the BBQ.

    I do quite often find myself thinking that we need to permit/encourage a more outdoorsy plug in the UK for domestic garden use. The square pin is all very well in the dry, but the mating plane has no water break. Perhaps a version of the old BS4343 with earth pin operated shutters would be worth inventing.

    Mike.

Children
No Data

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines