Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Suggested Helpful Answer
  • Replies 42 replies
  • Answers 1 answer
  • Subscribers 39 subscribers
  • Views 8544 views
  • Users 0 members are here
Options
You may also be interested in

EICR coding for lack of local isolation of kitchen appliances

Alan B

I have been asked by a friend to provide a second opinion on EICR coding for kitchen appliances connected to sockets that can only be accessed by moving the appliance, in this case the appliances are free standing and it's in rented accommodation, not HMO.

It certainly contravenes current regulation 537.3.2.

Electrician that completed the EICR is coding it as a C2 and want's to install suitable isolators with associated costs and disruption. To my mind it's a C3 as it's a bit inconvenient but the appliances can still be isolated by turning a circuit breaker of at the CU. Alternatively everything is RCD  protected, moving a free standing appliance without isolation isn't that risky.

I then started to look for documentation  and articles to provide guidance on the sittuation without much luck. Plenty describing why it's required and how to achieve it.

How would others code this, are there any articles you are aware of on the subject. When was the requirement introduced?

Appreciate any input you have. 

Parents
  • 0

    The only "mechanical maintenance" I can do on our washing machine is to take the filter out to clean it, everything else requires the machine to be pulled forward to access the screws to take the top or back off.

    As our washing machine is under a counter nothing other than cleaning the filter can be done without pulling it into the centre of the room. 

    I am also in England and don't rent my home, which should not be relevant as the regs are the same across the UK. 

    I have DP switches over the counter for the washing machine and dishwasher,  but not the fridge freezer, they all have accessible switches on the actual appliances. 

    However, to access the consumer unit I generally have to move a vehicle on my drive, then unlock and open the garage door, which obviously takes a few minutes. 

Reply
  • 0

    The only "mechanical maintenance" I can do on our washing machine is to take the filter out to clean it, everything else requires the machine to be pulled forward to access the screws to take the top or back off.

    As our washing machine is under a counter nothing other than cleaning the filter can be done without pulling it into the centre of the room. 

    I am also in England and don't rent my home, which should not be relevant as the regs are the same across the UK. 

    I have DP switches over the counter for the washing machine and dishwasher,  but not the fridge freezer, they all have accessible switches on the actual appliances. 

    However, to access the consumer unit I generally have to move a vehicle on my drive, then unlock and open the garage door, which obviously takes a few minutes. 

Children
No Data

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines