Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Suggested Answer
  • Locked Locked
  • Replies 3 replies
  • Helpful Answers 1 Helpful answer
  • Subscribers 36 subscribers
  • Views 1189 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Dual LV Supply with interlock

Anthony Tune

Hi, 

I am looking to find a solution within Trimble Prodesign where I have two LV Supplies A & B. These supplies feed Panel A & Panel B with a motorised buscoupler (I do not see where to add a buscouple, just a panel section interlock). 

Where I am having issues is that the switching of the panels do not allow for both A & B supplies to be n/c at the same time, even with the interlock n/o. What can be done to resolve this?

Parents
  • 0

    I can run the scenario in ElectricalOM for you, if you can share the details of the supplies, conductors and protective devices. I would even be happy to do it on a teams call if you like.

    Only would take a short time (no pun intended)

Reply
  • 0

    I can run the scenario in ElectricalOM for you, if you can share the details of the supplies, conductors and protective devices. I would even be happy to do it on a teams call if you like.

    Only would take a short time (no pun intended)

Children
No Data

Community Rules & Guidelines