Solar panels temporarily disconnected

I have a solar installation comprising 17 panels dating from 2010.  8 panels have been temporarily disconnected prior to roof work that will take 4 months.  The panels will be reconnected once the work is complete.

Do I have to notify the FIT scheme of the disconnection and subsequent reconnection?

Parents
  • I have a solar installation comprising 17 panels dating from 2010

    As a side note.  Might be worth looking at the old panels and check the Peak Power.  As the panels are 14 years old they may only be producing 100 - 150W.  Newer panels Peak Power Output are in the 380 - 450W range.  The panels in themselves are not that expensive but the labour and the scaffolding is.

    Have a look at Trina panels on a supplier web site like

    https://midsummerwholesale.co.uk/buy/trina

    The increased energy production could be offset against the price paid to buy in energy to the property.  Maybe battery storage could be factored in?  As always if you intend to make changes to your PV install check with your local MCS approved installer that all is well with the proposed design changes.  Eg will the inverter work with the newer panels and such.

  • The trouble with buying new ones is that you lose the FIT subsidy for the old ones.  My old panels are rated at 190W each, while new ones can be anything up to 450W.  But the FIT payments are tied to a particular set of panels.  Take them off your roof, and the payments stop.

  • as the original poster  presumably will have 10 or 15 years of payments left to come based on the 2010 start year, the incentive to not break that original contract is quite high  ;-)
    At least for now,  2010 installation is worth a lot more than a modern one of the same roof area, even if that the new one would generate 3 times as much . In ten years time, that may not be the case.


    It does make one wonder though, if a panel fails, does it have to be replaced with an old style one..
    Mike

  • The panels in themselves are not that expensive but the labour and the scaffolding is.

    I am surprised how cheap they are.

    What would be a ballpark cost for a complete system please? From a personal perspective, it might be cost-effective to undertake approved training and do my own installation.

  • Hi Chris

    I am not a Solar PV installer myself but you could speak with someone like

    Mark Aliison

    Power Sonic Ltd

    Unit 12 Kellythorpe Industrial Estate YO25 9DJ, Driffield, East Riding Of Yorkshire, England, United Kingdom

    Tel: 01377 272651

    or

    Sam Fetherstone

         http://www.ovalrenewables.com

    Both do good work and they also post a lot on YouTube to show people the quality of their work.

Reply Children