1. Hi I've seen David's videos where he tests various AFDDs a it does seem like the Hager ones do have a problem. I beleive it's something they will sort out in the not to distant. One thing I don't get is that they've had these things in  the US for a few years now do they have as many issues with 5hem as we do? Can we not just copy the US technology admittedly it will Neen some slight mods mostly to do with making them suitable for 240 volts instead of 110 and 50 cycles instead of 60  don't know why they fo t just do that save all that faffing around

Sergio Fernandez said:

The USA AFDD is very much a different device (GFCI)

Isn't a GFCI (Ground Fault Circuit Interrupter) an RCD?

AFCI (Arc Fault Circuit Interruptor) is the US version. There are two types - "branch" (parallel arc detection, I understand) and "combination" (series and parallel, like our standard AFDDs), but to meet NEC, combination type should be used?

Also like our AFDDs, AFCIs are available in combined functionality devices - overcurrent, residual (ground fault) current and arc fault built into one breaker.

gkenyon said:

Isn't a GFCI (Ground Fault Circuit Interrupter) an RCD?

Well spotted.  I got my acronyms confused.  Our cousins in the US do things slightly different.  We use the term CU or DB they refer to it as Panelboard. 

Americans wiring rules also do not require  as much instrumented testing as we do and are much more likely  to follow a recipe build and then the traditional cowboy approach

"Wire up, Fire up, and  F  leave.

And therefore they are in the habit of just testing breakers by the trip button only.

Given their use of toy voltages, and correspondingly higher currents, they have a very different balance of shock and fire risk, leading to open bus-bars and other things we do not do.

It is probably not safe to copy too much across without allowing for that.

And as far as I can tell from my electronics  friends over there Arc Fault false alarms or at least trips due to things that are not part of the local installation can be a real and persistent problem.

Mike.

mapj1 said:

Given their use of toy voltages, and correspondingly higher currents, they have a very different balance of shock and fire risk, leading to open bus-bars and other things we do not do.

Of course, higher current (and open busbars) = higher risk of arc flash.

Due to this, and a general "no live work" approach, arc flash is accordingly less of a worry in the UK.

The USA also use a lot of wire nuts as apossed to lever style like Wago or Ideal

The USA also use a lot of wire nuts

Not too long ago we did too - just that our version were usually ceramic and called screwits.

   - Andy.

AJJewsbury said:

Not too long ago we did too

Screwits are back, and to our relevant "local" UK standards (BS EN 60998), for example (other suppliers and manufacturers are also available): www.cef.co.uk/.../4108297-weatherproof-wire-connector-blue-pack-of-15

gkenyon said:

Screwits are back,

eek!   and £19 + VAT for a pack of 15 of them too ! 

They may be out there and quoted as suitable for wet conditions, I still won't be specifying very  many...

I'm not sure if they are more or less prone to arcing  than say choc block or a wago in a box.
Mike

For out door work a butt crimp with 2 layers of glued heat shrink for LV or maybe a resin torpedo would be better if the joint is needed.

Sounds like a much better idea. Have found the old ceramic screwitts under floors before now, usually with the twisted copper ends of the cable pulled taut and leaving half exposed copper strands to the wind. Suffice to say they went in the bin.

On the AFDD front, it seems that Hager have issued some kind of firmware upgrade which effectively 'knobbles' the device like a chemical cosh! How useful!

Sounds like a much better idea. Have found the old ceramic screwitts under floors before now, usually with the twisted copper ends of the cable pulled taut and leaving half exposed copper strands to the wind. Suffice to say they went in the bin.

On the AFDD front, it seems that Hager have issued some kind of firmware upgrade which effectively 'knobbles' the device like a chemical cosh! How useful!