Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Helpful Answer
  • Locked Locked
  • Replies 18 replies
  • Subscribers 38 subscribers
  • Views 3850 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

ElectricalOM Source setup.

richard64

Are there any ElectricalOM users on here who can explain setting up the source details?

Thank you.

Parents
  • +1

    Not understanding this at all. For a 69KvA tx with a 6% impedance, I make the short circuit KVA to be 1150 and the KA circa 1.7.

    How is the source Iscc the same as the line neutral in a three-phase set up?

    It looks like the programme is not user friendly for a simple design where source details and cable details between source and installation are unknown. 

  • 0 in reply to lyledunn

    I had problems explaining why you double pscc on a 3 phase system.  The software is way overcomplicated for simple designs.

Reply
  • 0 in reply to lyledunn

    I had problems explaining why you double pscc on a 3 phase system.  The software is way overcomplicated for simple designs.

Children
No Data

Community Rules & Guidelines