I have been asked if it is safe for our electricians to work alone on a 3 phase distribution board, what are peoples thoughts please.

Hi, I work as a Qualifying Supervisor for a company that covers four counties with electricians. Currently in one county there is a requirement that if some one will need to work in a live 3 phase board, two operatives will be present. The thinking being there is some one to watch your back and assist in case of a problem. The other county's have now come and said they don't do this. 

So my question is, if the electrician is carrying out dead tests on the worked on circuit that is housed in a DB that can't be isolated, should two people be present.

Looking at the various documents we have like The Electricity at work Regulations, Electricity at work document from HSE (HSG85) I understand a risk assessment is required and a safe system of work document.

I was just wanting to get an idea of what other company's do, and any guidance relating to such documents.

Thank you for your help and advice in advance.

Parents
  • The other question that comes to mind is whether DBs should be a special case - most of the hazards are also potentially present elsewhere - e.g. in single phase DBs or other 3-phase equipment or just re-connecting tails to henley blocks. Is there a more general live working policy to be considered?

       - Andy.

Reply
  • The other question that comes to mind is whether DBs should be a special case - most of the hazards are also potentially present elsewhere - e.g. in single phase DBs or other 3-phase equipment or just re-connecting tails to henley blocks. Is there a more general live working policy to be considered?

       - Andy.

Children
No Data