Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Helpful Answer
  • Replies 16 replies
  • Subscribers 36 subscribers
  • Views 1765 views
  • Users 0 members are here
Options
You may also be interested in

EVSE Earth leakage limits

Sailbadthesinner

Anyone know what earth leakage current limit applies for an EVSE?

For regular Type 2 Mode 3 32A 7kW or 21kW AC charge points.

For the purposes of in service inspection and testing is there an earth leakage limit specified by an applicable product standard?

I'm not talking about DC leakage currents (whole different can of worms).

They are (generally) built double insulated so does a 0.25mA Class II limit apply?

They supply an EV which is definitely Class 1, they are not handheld but are certainly a similar touch voltage shock risk, so does a 0.75mA limit apply?

They are fixed equipment (strictly the EV isn't fixed but that's splitting hairs), but not motor operated (certainly while charging), so does a 3.5mA limit apply?

Your learned thoughts appreciated?

Parents
  • 0

    Thanks to all for your contributions.

    Seems I was right to be confused.  I'm particularly surprised that 5mA is considered acceptable from the EV itself but the PE connection is monitored so the EVSE will disconnect in the event of a broken PE. 

    The EVSE signalling is not so much of a concern (barring significant faults) as the CP signal is 12v and a maximum of 9mA at 1kHz, or 12mA DC into a short circuit,  The PP signal is 5v and a maximum of 15mA into a short circuit.  These currents are only in the PE connection between the EVSE and EV not in the supply CPC so they are never seen by the rest of the installation.

    Many thanks.

  • 0 in reply to Sailbadthesinner
    Sailbadthesinner said:
    These currents are only in the PE connection between the EVSE and EV not in the supply CPC so they are never seen by the rest of the installation.

    Unless there's an N-PE fault between the EVSE and EV, in which case the current may be shared by the installation neutral through the point at which PE is split from N - i.e. in TN-C-S, the service head.

  • 0 in reply to gkenyon

    True, hence the 'barring significant faults'.  But as the open circuit voltages are so low these currents are not a safety concern unless they blind an RCD, then the RDCDD or Type B RCD should deal with that.

    Thanks.

Reply Children
No Data

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines