This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Has it ever been acceptable to use chocolate blocks stuffed into ceiling above lights

As above. Has stuffing chocolate blocks into the ceiling behind light fittings ever been acceptable.  I remember when I was an apprentice in the mid 1980s that is what I was told to do at the time, usually taped up. The guy I worked for was well respected.

I have just carried out an EICR amongst other works on what is a very nice farm house with apart from the lights a very nice electrical job.  There are probably 50 light fittings including downlights that I am changing anyway where every connection is stuffed up above them ( not taped up not that it makes much difference). The ones in the roof space buried in insulation.  

Gary

Parents
  • Well I suppose if you go back before 1882... Seriously for as long as I can remember joints are supposed to have been suitably enclosed. You can use building fabric for that in some circumstances (e.g. backless light fittings onto non-combustible walls, or even the old backless Wylex CUs), but I can't see an ordinary floor void (timber joists, possibly timber floorboards over) really doing the job. Also consider the accessibility of live parts covered with only basic insulation...

       - Andy.

  • Thanks Andy. I couldn't see how it could have been but it was how I was shown as a trainee hence the question.  I have rectified most now but still a few to do Monday ( Golf tomorrow Slight smile )

    Gary

  • You have rectified all the dodgy connections you have done since you were an apprentice and still found time for a round of golf? Respect

Reply
  • You have rectified all the dodgy connections you have done since you were an apprentice and still found time for a round of golf? Respect

Children
No Data