Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 6 replies
  • Subscribers 38 subscribers
  • Views 2408 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Garage changed to granny flat.

Jonomac

Hi there. 

I'm converting my garage to a granny flat. I have a TNCS system in our house. Supply to 100amp main switch in consumer unit, fed down to 2 main RCDs feeding 5 mcbs each. 

The board in the garage is exactly the same set up. What's the best way to feed the garage from the main consumer unit. If I wire into an MCB which is linked to the RCD. This would feed the main switch in the garage leading to other RCDs. Same trip characteristics both would trip. 

The supply to the garage is by means of SWA cable.

Any design solutions would be grateful.

Parents
  • 0

    This is such an elementary question that I wonder whether you should be doing this at all.

    How is the board in the garage fed at the moment?

Reply
  • 0

    This is such an elementary question that I wonder whether you should be doing this at all.

    How is the board in the garage fed at the moment?

Children
No Data

Community Rules & Guidelines