Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Replies 11 replies
  • Subscribers 37 subscribers
  • Views 848 views
  • Users 0 members are here
Options
You may also be interested in

metal balustrade /hand rail bonding

Newfutile

during an inspection and subsequent Consumer Unit change i have found the above to be bonded .

i have not checked this to see if its an extranous conductive part.

my thoughts are in a pen fault ,this could all become live  to some degree.

is the risk and results of this lower than no bonding at all?

Parents
  • 0

    All light fittings are class 2 and out of reach,this is a block of flats that also supplys lamp posts (separate rcbo),there are cleaners sockets here.

    I have connected it up as that's how I found it,not that makes it right..

    I'm changing the Consumer Unit on the adjacent block today if I get time I will measure to check if it's an extraneous conductive part or not.

    This staircase balustrade is also connected to the MET, in the other block.

Reply
  • 0

    All light fittings are class 2 and out of reach,this is a block of flats that also supplys lamp posts (separate rcbo),there are cleaners sockets here.

    I have connected it up as that's how I found it,not that makes it right..

    I'm changing the Consumer Unit on the adjacent block today if I get time I will measure to check if it's an extraneous conductive part or not.

    This staircase balustrade is also connected to the MET, in the other block.

Children
No Data

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines