Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • Replies 21 replies
  • Subscribers 42 subscribers
  • Views 1580 views
  • Users 0 members are here
Options
You may also be interested in

Earth Banjo Securing Practices

AMK


Recently, I’ve noticed an increasing trend in the use of self-tapers to secure earth banjos. The other  end of the cable has an earth tail from the banjo, secured with a 6mm bolt and nut. Has anyone else observed this practice, and what are your thoughts on its effectiveness or potential implications? I’d be interested in hearing different perspectives or experiences with this setup. 
-Andrew

Parents

  • That's a poor workmanship as many has agreed in this post- hazard of scratching your hands when future maintenance is due, hazard of damaging the cabling inside the enclosure, not fully securing tightness as the old brass nut and bolt. That's a typical 'what's left in the van' chuck it in. Not a good practice and probably get the job done quick and move to the next one.

Reply

  • That's a poor workmanship as many has agreed in this post- hazard of scratching your hands when future maintenance is due, hazard of damaging the cabling inside the enclosure, not fully securing tightness as the old brass nut and bolt. That's a typical 'what's left in the van' chuck it in. Not a good practice and probably get the job done quick and move to the next one.

Children
No Data

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines