Wondering what other sparks would do here.
Got asked to go look at supplying a future log home in a back garden. The client wished to make it into an AIr BNB, so bathroom with a shower and a kitchen with appliances etc. On my arrival, I looked at consumer units within the property and discovered there was 7 boards different ones in different locations.
Nearest consumer unit was a container which i was pretty sure it only had a 6mm supplying it and it was a rewire able fuse db.
I then went back to the main consumer unit within the property which was plastic and had no RCD protection. With so much going on within the property I advised on carrying out an EICR as i believed someone has been doing additions/alterations themselves.
Turns out there is 56 circuits within the house and out buildings. I gave the client a price which they didn't expect, i also made them aware after the EICR there will no doubt be plenty observations.
To keep costs down i was thinking about just testing the circuits within the main DB and working it out from there - again i wouldn't be too pleased in doing this.
What do we think?
Thanks
