Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • Replies 18 replies
  • Subscribers 40 subscribers
  • Views 1130 views
  • Users 0 members are here
Options
You may also be interested in

Guidance Note 3 Inspection and Testing 2022 Appendix C

Sergio Fernandez

Guidance Note 3 Inspection and Testing 2022 Appendix C


Is the diagram / picture incorrect?  Should it not show the Neutral/Blue in the middle under the meter and the Line/Phase on the outer part?  See attachment



As always please be polite and respectful in this purely academic debate.





Come on everybody let’s help inspire the future

Parents

  • Just as an aside, I am using this method at every opportunity during periodic inspections

    .

    Pretty good at identifying issues but whilst the above indicates a definite problem, it is a tad more difficult to act on a maximum level. 

  • in reply to lyledunn

    Is the N going through the clamp?

      - Andy.

  • in reply to AJJewsbury

    Firstly, apologies to Sergio, I shouldn’t have hijacked his post! However, to answer AJ’s question, yes, the neutral is through the clamp. 

  • in reply to lyledunn

    Actually, it looks like I have made a silly mistake, the neutral is going through the clamp but not in the right direction! Thanks AJ!

  • in reply to lyledunn

    Hi Lyle

    You are more than welcome to hijack any of my posts.  After all we are all here as a group of engineers discussing engineering and trying to impart our knowledge and curiosity.

    Come on everybody let’s help inspire the future

Reply
  • in reply to lyledunn

    Hi Lyle

    You are more than welcome to hijack any of my posts.  After all we are all here as a group of engineers discussing engineering and trying to impart our knowledge and curiosity.

    Come on everybody let’s help inspire the future

Children
No Data

Community Rules & Guidelines