For a standard domestic Install, split board with 2x Type AC main switches.
No PV or Car Chargers should this be a C3 or C2?
Thanks in advance
For a standard domestic Install, split board with 2x Type AC main switches.
No PV or Car Chargers should this be a C3 or C2?
Thanks in advance
Indeed .. (from memory the point was expanded on further down - assuming it's the same one I saw a while ago). (Continuing from an earlier discussion) given the human body isn't particularly less sensitive to currents at slightly higher frequencies, do these devices provide adequate additional protection? (I'm not doubting the comply with standards, but the standards were set on the assumption of 50Hz currents only).
- Andy.
Indeed .. (from memory the point was expanded on further down - assuming it's the same one I saw a while ago). (Continuing from an earlier discussion) given the human body isn't particularly less sensitive to currents at slightly higher frequencies, do these devices provide adequate additional protection? (I'm not doubting the comply with standards, but the standards were set on the assumption of 50Hz currents only).
- Andy.
We're about to take you to the IET registration website. Don't worry though, you'll be sent straight back to the community after completing the registration.
Continue to the IET registration site