Stage Projector Screen
Trainer DR.Jawad Saleem
Guests Pannel at Stage
Audience and Participants of Workshop
Trainees Designing the PCBs
Female Trainees Designing PCBs
PCBs Etching Process
PCB Drilling
Ready PCBs
Soldering
SMD Components mounted on PCB
The Workshop contained Two Sessions:
(i) Simulation Session
In Simulation Session, there was a detailed lecture on Simulation to implement a circuit by using Proteus Software. Participants also practiced the whole learning by their own to get a handsome experience. Team IET was there to facilitate them. This Session was of 3 hours started at 10:00 (AM) on Saturday (10/12/2016).
In Simulation Session, there was a detailed lecture on Simulation to implement a circuit by using Proteus Software. Participants also practiced the whole learning by their own to get a handsome experience. Team IET was there to facilitate them. This Session was of 3 hours started at 10:00 (AM) on Saturday (10/12/2016).
(ii) Hardware Session
In Hardware Session, there was a brief demonstration on Hardware Implementation (Ironing, Etching, Drilling, Soldering, Testing). Required material was provided to participant to implement the circuit on Hardware. Team IET was there to guide them at each step. This Session was of 6 hours started at 10:00 (AM) on Sunday (11/12/2016).
In Hardware Session, there was a brief demonstration on Hardware Implementation (Ironing, Etching, Drilling, Soldering, Testing). Required material was provided to participant to implement the circuit on Hardware. Team IET was there to guide them at each step. This Session was of 6 hours started at 10:00 (AM) on Sunday (11/12/2016).
The Results of both Sessions were excellent. Feedback from Participants was good enough.
Team IET OnCampus CIIT Abbottabad Network - Event Organizers
IET Facilitator Dr.Jawad Saleem at Center