Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 13 subscribers
  • Views 173 views
  • Users 0 members are here
Options
You may also be interested in
This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

Looking for help with a moving coil RIAA Pre amp

Former Community Member
Former Community Member

 

Parents
  • Former Community Member
    0 Former Community Member
    Hello Matt,

    You can see the circuit diagram of a Moving Coil Phono Preamp without opamp ic's (by the very well-known audio designer John Linsley-Hood) by using the following link:

    http://sound.westhost.com/project25.htm

    It is designed for +-5 Volts supply, but the addition of a pair of three terminal voltage regulator ic's with a +5V and a -5V output will enable +-15 Volts operation.

    I hope you find this circuit of interest.

    Regards
    John
Reply
  • Former Community Member
    0 Former Community Member
    Hello Matt,

    You can see the circuit diagram of a Moving Coil Phono Preamp without opamp ic's (by the very well-known audio designer John Linsley-Hood) by using the following link:

    http://sound.westhost.com/project25.htm

    It is designed for +-5 Volts supply, but the addition of a pair of three terminal voltage regulator ic's with a +5V and a -5V output will enable +-15 Volts operation.

    I hope you find this circuit of interest.

    Regards
    John
Children
No Data

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines