Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 3 replies
  • Subscribers 13 subscribers
  • Views 1882 views
  • Users 0 members are here
Options
You may also be interested in
This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

Machinery Safety - is the Pilz/TUV CMSE course recognised within industry?

Paul Bridgeman
Hi All,


I have been looking for a course for myself and a few of my colleagues with regards to machinery safety etc. because we manufacture in-house test rigs and production machinery  - although we CE mark these we could all do with some more advanced training in safety & legislation.


I have found a 'CMSE' (Certified Machinery Safety Expert) course provided by Pilz and certified by TUV - has anyone heard of or completed this course?

Is there an alternative to this?

Your help would be much appreciated - Thanks
Parents
  • Former Community Member
    0 Former Community Member
    I have done the CMSE course, and IMHO it is recognised and worthwhile.

    There are others, my re-cert is up in the new year, and I intend to do that, as long as my health holds up.

    For what I do I am also looking at the TUV FSEng course, probably through Rockwell.

    I think there are slight differences and also that the courses complement each other.

    HSE also do a 4 day series on machinery which is good for beginners.

    The CMSE & FSEng are not entry level courses.

    They also do not give you all the skills and competence you need, but they do give a good understanding of the basics legislation etc. upon which to start building your competence.
Reply
  • Former Community Member
    0 Former Community Member
    I have done the CMSE course, and IMHO it is recognised and worthwhile.

    There are others, my re-cert is up in the new year, and I intend to do that, as long as my health holds up.

    For what I do I am also looking at the TUV FSEng course, probably through Rockwell.

    I think there are slight differences and also that the courses complement each other.

    HSE also do a 4 day series on machinery which is good for beginners.

    The CMSE & FSEng are not entry level courses.

    They also do not give you all the skills and competence you need, but they do give a good understanding of the basics legislation etc. upon which to start building your competence.
Children
No Data

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines