Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 3 replies
  • Subscribers 15 subscribers
  • Views 269 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Machine Tool installations

Dave wood

I am investigating how machine tool installations should be tested and inspected. I have asked several equipment manufacturers about test certificates and they look at me blankly. In general what I have found is that the supply is tested and certified to the isolator/switchfuse feeding the machine but when the equipment is connected, there is no testing carried out on the actual kit. Does anybody have any thoughts/experience in this area. This also covers periodic inspection. I have used BS EN 60204 as a basis when I have discussed with Machine tool manufacturers.


Parents
  • 0
    Assuming (always dangerous) that you are in the UK the guiding documents would be the Machinery Directive for the machine itself and the  Provision and use of Work Equipment Regulations for its maintenance and use. Machine tools may also have their own specific standards as a subset of these two main documnets.


    Best regards


    Roger
Reply
  • 0
    Assuming (always dangerous) that you are in the UK the guiding documents would be the Machinery Directive for the machine itself and the  Provision and use of Work Equipment Regulations for its maintenance and use. Machine tools may also have their own specific standards as a subset of these two main documnets.


    Best regards


    Roger
Children
No Data

Community Rules & Guidelines