Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 9 replies
  • Subscribers 17 subscribers
  • Views 1158 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

IDC Terminal Blocks

Rob Eagle
I am looking for PCB mounting IDC terminal blocks as used by BT but finding it extremely difficult to source, any ideas anyone?


Rob
Parents
  • 0
    Thank you for the link however I need to be able to terminate wires individually.  the nice thing about the telecom IDC was the tool also cut the end of the wire off.  I really would like to be able to source the telecom ones but PCB mounted rather than frame mounted.  With the quantities involved it is possible if we can find a manufacturer that we could commission a special.


    Rob
Reply
  • 0
    Thank you for the link however I need to be able to terminate wires individually.  the nice thing about the telecom IDC was the tool also cut the end of the wire off.  I really would like to be able to source the telecom ones but PCB mounted rather than frame mounted.  With the quantities involved it is possible if we can find a manufacturer that we could commission a special.


    Rob
Children
No Data

Community Rules & Guidelines