This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

DOES IET MAINTAIN ITS 2006 OBJECTIVES FOR ALL

Former Community Member
Former Community Member
The Institution of Engineering and Technology (IET) is the largest multidisciplinary professional engineering institution in the world.
Does IET satisfy the aspirations of all its members and potential Professional Engineer members of both genders in the UK?

At the creation of IET in 2006, all members of IET, MIET, were considered to be equal. It was a multidisciplinary PEI for all PE grades and associates of both genders.

We have lost many IEng members.
We have lost many IIE CEng members.
We do not value and do not attract new IEng members, not to mention women and technicians (6% + 1%).
We have done very little to attract women into the Technology disciplines at any of the grades.
Technicians are not really taken into account in IET or in the UK.

This is an IET problem; it seems to be a typical UK PEI problem, or even a UK society problem.

Do the Council, the Board and IET Staff (nearly 500) uphold 2006 vales today?
Have we drifted away from our 2006 objectives?

I have my personal observations; these IET blogs show great discontent, and the UK PE & PEI statistics are deplorable.
I believe that IET has, over the last 10 years, lost its “cap”; it satisfies only a small part of IET membership.
There is perhaps a reason; to work in Technology in the UK today you need to be ECUK registered. To be ECUK registered you need to join a PEI.
IET is the only multidisciplinary PEI open to generalists and novel Technologists.

Do Professional Engineers join just to have access to Technology posts in this hard competitive world?
Do they join for the title and just ignore the objectives of IET in 2006?

Should we continue on this path or should IET change?

John Gowman – MIET 

Parents
No Data
Reply
  • Former Community Member
    0 Former Community Member in reply to Zoomup
    John,
    The key word is - CEng is an international engineering qualification.
    I would argue the opposite from your point - The Engineering Council regulates professional engineering titles in the UK. With more than 180,000 registrants from many countries, designation as a Chartered Engineer is one of the most recognizable international engineering qualifications. And it being such is also a contribution from non UK CEng's.

    The CEng are not license to practice Engineering, In Canada or USA the PE is a license.

    An example is a CEng who is working in another country in a major high tech company.

    That CEng is a successful Engineer who represents his registration with honor. What does it to the promotion of UK Engineering?  BTW it can be international company with divisions in UK, US and other countries.

    In reality if you are CEng, then in US or Canada its not a license like PE.

    You will have to take exams and apply for license and provide Washington Accord degree or similar.

    Another point is that if foreign Engineer is a CEng but is not UK Citizen then they can't work in UK leagaly, so there is no harm to UK Engineers.


     



Children
No Data