Hello, I need a guidance about Standard cable gland, Stuffing cable gland and Insulated cable gland - their definitions and application.

Standard cable gland, Stuffing cable gland and Insulated cable gland - their definitions and application.

Parents
  • Not sure about definitions, but in common usage:

    Cable gland - could be any kind of cable gland, insulating or metallic, for armoured or plain cables.

    Insulated cable gland - generally a gland made from insulating material (plastic). There are also some specialized glands of mostly metallic construction but with an insulating layer that are intended to "gap" (insulate) a cable armour from a metallic enclosure (e.g. when different earthing systems meet) - but they're few and far between. Glands that connect to the armour or braid of a cable tend to be metallic (although there are some composite ones on the market now).

    Stuffing gland - a gland that grips and seals by compressing some "stuffing" - these days that's likely to be a soft rubber or plastic doughnut shaped ring. Normally used with simple sheathed cables, but occasionally used with armoured cables where a connection to the armour is positively not wanted. The body of the gland may be metallic or insulating, but plastic is most common these days.

       - Andy.

Reply
  • Not sure about definitions, but in common usage:

    Cable gland - could be any kind of cable gland, insulating or metallic, for armoured or plain cables.

    Insulated cable gland - generally a gland made from insulating material (plastic). There are also some specialized glands of mostly metallic construction but with an insulating layer that are intended to "gap" (insulate) a cable armour from a metallic enclosure (e.g. when different earthing systems meet) - but they're few and far between. Glands that connect to the armour or braid of a cable tend to be metallic (although there are some composite ones on the market now).

    Stuffing gland - a gland that grips and seals by compressing some "stuffing" - these days that's likely to be a soft rubber or plastic doughnut shaped ring. Normally used with simple sheathed cables, but occasionally used with armoured cables where a connection to the armour is positively not wanted. The body of the gland may be metallic or insulating, but plastic is most common these days.

       - Andy.

Children
  • I broadly agree with the above. Here are some examples of the sort of thing.

    I don't think you'll find formal regs grade definitions, but in the electrical world at least.  'stuffing glands' usually provide some degree of waterproofing to some IP rating - the compression of the sealing material 'stuffed' against the cable jacket has to be the right size for the cable chosen however. Also called a compression gland, and easily compromised by a poor entry seal between the body and the box it is entering even when the seal to the cable is perfect.



    Insulating stuffing gland.


    Note also that stranded cables leak between the ends as there is a gap between the wire strands..

    Insulating glands do not provide electrical continuity between cable armour and a metal box. Any other gland, may or may not but is not specifically designed to do so.
    Some are very much designed to afford a grounding function.

    This is both a stuffing gland, and metallic and designed to earth an armoured cable.

    compare with this cheaper indoor only  metallic gland, still does the earthing but not watertight nor a  stuffing design.


    Mike.