Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 34 replies
  • Subscribers 32 subscribers
  • Views 3219 views
  • Users 0 members are here
Options
You may also be interested in
This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

Twin Impeller Shower Pump

Zoomup
Ref. Grundfoss STP-2.0B twin impeller shower pump. 2.2 Amp. 510 Watts. 240 Volts.


Will this pump be o.k. run through a B6 M.C.B. or will it trip the B6 on starting do you think?


Thanks,


Z.
Parents
  • 0
    Although if you're following the manufacturer's instructions to the letter - "The unit must be connected to a switched spur fused at 5A" (my emphasis) there seems little advantage to messing about with a lowish rated MCB.


    Presumably the FCU could be located near the CU rather than the pump (provided it can be locked off of course).


       - Andy.
Reply
  • 0
    Although if you're following the manufacturer's instructions to the letter - "The unit must be connected to a switched spur fused at 5A" (my emphasis) there seems little advantage to messing about with a lowish rated MCB.


    Presumably the FCU could be located near the CU rather than the pump (provided it can be locked off of course).


       - Andy.
Children
No Data

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines