Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 8 replies
  • Subscribers 32 subscribers
  • Views 751 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

O ring kits

Sparkingchip
How reliable are o rings made from kits?
Parents
  • 0
    The problem with kits is that there are hundreds of sizes available, and a kit covers only some of them. The place to go is usually a hydraulic fittings supplier who will probably have a very wide range of sizes. Powertran in Newtownards is probably worth a ring,



    Tel 028 9181 3427




    Graham is very helpful and you can probably persuade him to post some to you for a few quid. You will need to measure the ring diameter, (ruler), and for a static seal the approximate diameter (measure the groove width).


    Regards

    David

Reply
  • 0
    The problem with kits is that there are hundreds of sizes available, and a kit covers only some of them. The place to go is usually a hydraulic fittings supplier who will probably have a very wide range of sizes. Powertran in Newtownards is probably worth a ring,



    Tel 028 9181 3427




    Graham is very helpful and you can probably persuade him to post some to you for a few quid. You will need to measure the ring diameter, (ruler), and for a static seal the approximate diameter (measure the groove width).


    Regards

    David

Children
No Data

Community Rules & Guidelines