Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 62 replies
  • Subscribers 32 subscribers
  • Views 7970 views
  • Users 0 members are here
Options
You may also be interested in
This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

Grid switch ratings enquiry

Farmboy
Had an interesting chat with a tech dept this afternoon after coming across some grid switches in a domestic kitchen.


Four grid switches (sharing a common backbox) are each fed via their own 16A cb's, and each feeds 1G sockets (for a cooker hood, fridge freezer, etc). Ignoring the cable sizes (the focus being on the grid switches), given the 13A plug fuses limits the loads in each cct, would you have the current rating of the grid switches equal to or higher than the 16A cb's (e.g. 20A), or lower (but equal to or higher than the socket rating e.g. 13A/14A)?


F
Parents
  • 0

    -2400-:

    To add to the chance of confusion, the MK technical data for Logic Plus range states:


    Current rating

    13A

    (3 Gang Switchsocket 13A total)


    which without any further information, it would be reasonable to interpret as though the 2 gang was 2 x 13A, otherwise they might have written

    (2 Gang and 3 Gang are 13A total)




    Glad not to be alone on this one, but equally well they have not specified 2 x 13 A.


    I maintain that a twin socket is rated at 14 A + 6 A. That is not necessarily the same as, for example, 10 A + 10 A. It may be more or less onerous.

Reply
  • 0

    -2400-:

    To add to the chance of confusion, the MK technical data for Logic Plus range states:


    Current rating

    13A

    (3 Gang Switchsocket 13A total)


    which without any further information, it would be reasonable to interpret as though the 2 gang was 2 x 13A, otherwise they might have written

    (2 Gang and 3 Gang are 13A total)




    Glad not to be alone on this one, but equally well they have not specified 2 x 13 A.


    I maintain that a twin socket is rated at 14 A + 6 A. That is not necessarily the same as, for example, 10 A + 10 A. It may be more or less onerous.

Children
No Data

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines