This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

Schneider/Telemecanique Zelio-Logic smart relay

Hi all,

first post to the new look forum. Does anyone have experience of the above ( the one I need info on is a model which has been superseded).

One of the perameters needs to be changed and I need to know if this can be done directly on the unit itself or if software is required.

Either way I’m going to have to get someone in to do it, as I have no plc experience, but I’d like to know in advance what’s actually involved.

Thanks in advance for any info.
Parents
  • Hi Geov


    Yes there is special software and you will need a programming cable. The software used to be free to download, but you may not be able to get the original programme by uploading it depending on the security settings.

    It could be problematic so I suggest the original installer.


    Regards

    David
Reply
  • Hi Geov


    Yes there is special software and you will need a programming cable. The software used to be free to download, but you may not be able to get the original programme by uploading it depending on the security settings.

    It could be problematic so I suggest the original installer.


    Regards

    David
Children
No Data