Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 9 replies
  • Subscribers 32 subscribers
  • Views 825 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Schneider/Telemecanique Zelio-Logic smart relay

geov
Hi all,

first post to the new look forum. Does anyone have experience of the above ( the one I need info on is a model which has been superseded).

One of the perameters needs to be changed and I need to know if this can be done directly on the unit itself or if software is required.

Either way I’m going to have to get someone in to do it, as I have no plc experience, but I’d like to know in advance what’s actually involved.

Thanks in advance for any info.
Parents
  • 0
    Thanks Dave, I suspected as much. Unfortunately the client has no info on the original installer/ installation. I’ve been in touch with a company who may be able to assist, so fingers crossed. On one level, it’s a simple change to a time on peramater, but without the software it becomes a bit of a bind.

    Thanks again.
Reply
  • 0
    Thanks Dave, I suspected as much. Unfortunately the client has no info on the original installer/ installation. I’ve been in touch with a company who may be able to assist, so fingers crossed. On one level, it’s a simple change to a time on peramater, but without the software it becomes a bit of a bind.

    Thanks again.
Children
No Data

Community Rules & Guidelines