The IET is carrying out some important updates between 17-30 April and all of our websites will be view only. For more information, read this Announcement

Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 17 replies
  • Subscribers 31 subscribers
  • Views 5363 views
  • Users 0 members are here
Options
You may also be interested in
This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

fluke 1664fc tester

Fred
Hello. Does anyone have a fluke 1664fc tester, and have problems with it ? Most times I use it, it comes up with error message 5, which I think is interference on a circuit. Had the tester a couple of years now. Starting to wish a had bought a megger. It also trips rcds out, spoke to Fluke technical and their response was its a very complex tester, that's when technical is open, as apparently technical is closed on Tuesdays, as its the chaps day off !!!
Parents
  • 0
    Error code 5 on loop test indicates that that the data is noisy (e.g. if there are appliances drawing varying current levels on that circuit). You can still get the result by pressing the up/down button, but the result may be less accurate. Error 4 indicates a voltage of > 10V between N & E.
Reply
  • 0
    Error code 5 on loop test indicates that that the data is noisy (e.g. if there are appliances drawing varying current levels on that circuit). You can still get the result by pressing the up/down button, but the result may be less accurate. Error 4 indicates a voltage of > 10V between N & E.
Children
No Data

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines