Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 3 replies
  • Subscribers 32 subscribers
  • Views 1226 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Amtech - Ring Circuit Length

Apostolos
Good afternoon.

I know some people in here do not think much of Amtech however for me is an everyday reality as I work in the design sector and everyone wants everything in Amtech.

Anyway....

In a ring circuit what would you put down as length in Amtech?

The total length from start to finish starting from the DB and ending in the DB?

Some other electrical engineer told me to put the length to the fartherst socket but it does not make sense in the way he phrased it.

Has anyone who used Amtech got any idea what Amtech EXPECTS as a ring length?

Thanks
Parents
  • 0
    But presumably assuming the ring has no spurs - as spur cable will contribute to Zs and v.d. at about four times the rate of ring cable (especially significant for a spur connected at the furthest point of the ring).

       - Andy.
Reply
  • 0
    But presumably assuming the ring has no spurs - as spur cable will contribute to Zs and v.d. at about four times the rate of ring cable (especially significant for a spur connected at the furthest point of the ring).

       - Andy.
Children
No Data

Community Rules & Guidelines