Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 23 replies
  • Subscribers 32 subscribers
  • Views 2342 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How a simple job can go wrong quickly....

Former Community Member
Former Community Member
Not my work before I relate:


Existing 3-ph circuit breaker DB in a shop has a 30 mA 4 pole RCD belatedly fitted in a separate enclosure to provide blanket RCD protection. OK, not ideal.

Electrician asked to install extra 13 A socket-outlet in window during shop hours so padlocks off the circuit's circuit-breaker and proceeds, He lets the circuit neutral and cpc touch when fitting the socket-outlet and out trips the RCD as expected. Resets and shop keeper then announces that the card reader, till, air-con and some lights not working.


All that equipment now duff (technical term!).


For an interesting weekend quiz, what happened?


Without hindsight and the work being done during opening hours, what would you have done differently?


Regards


BOD






Parents
  • 0

    mapj1:

    Possible, but a reverse polarity supply on 3 phase is very hard not to notice, and while near the origin  shorting L1 to N does indeed over-volt L2-N and L3-N, you do not need to be many metres down the line for most of the volt drop to be in the final cct.




    I was thinking of a reverse in polarity somewhere along the SP circuit. I have to admit that my offering is guesswork, but I expect that BOD will tell us tomorrow. ?

Reply
  • 0

    mapj1:

    Possible, but a reverse polarity supply on 3 phase is very hard not to notice, and while near the origin  shorting L1 to N does indeed over-volt L2-N and L3-N, you do not need to be many metres down the line for most of the volt drop to be in the final cct.




    I was thinking of a reverse in polarity somewhere along the SP circuit. I have to admit that my offering is guesswork, but I expect that BOD will tell us tomorrow. ?

Children
No Data

Community Rules & Guidelines