Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 4 replies
  • Subscribers 32 subscribers
  • Views 336 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Cable specification for Fire/BMS installation on a large complex site

Rhino60
Hi all

Does any one have a steer on the above? Perhaps any one in the consulting side of things?


Colin  MIET
Parents
  • Former Community Member
    0 Former Community Member
    BS 5839 Part 1 for normal or enhanced grade of cable based on the design would be the starting point. Obviously, you then have to consider your containment systems


    For the BMS - to some extent it would depend on your proposed architecture of the system (eg is it so big that you are using a lot of fibre backbone )


    Regards


    OMS


Reply
  • Former Community Member
    0 Former Community Member
    BS 5839 Part 1 for normal or enhanced grade of cable based on the design would be the starting point. Obviously, you then have to consider your containment systems


    For the BMS - to some extent it would depend on your proposed architecture of the system (eg is it so big that you are using a lot of fibre backbone )


    Regards


    OMS


Children
No Data

Community Rules & Guidelines