Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 18 replies
  • Subscribers 32 subscribers
  • Views 1769 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Audio Public Address Sound System.

Zoomup
Mornin' All,

                    I need some advice please.


Imagine a portable sound system as used by travelling musicians, rock guitarists or others with electric instruments. There will be a large mixing desk, and amplifier and speakers. All is well if the musicians with electric instruments only plug their 1/4 inch jack plugs into their instruments when the mixer sliders are down (off) so as not to cause a big pop or bang through the speakers. Sometimes though the jack plugs are unplugged from the instruments when the mixer sliders are up (on) and a terrible sound results from the speakers.


Is there a "magic box" that can be inserted in line with the audio leads from the instruments to the mixer that AUTOMATICALLY prevents this unwanted loud noise problem?


Thanks,


Z.
Parents
  • 0
    I was only offered a non balanced lead to go to the main mixer with a 1/4 inch jack plug on it. Do D.I. boxes use XLR sockets?


    Z.


Reply
  • 0
    I was only offered a non balanced lead to go to the main mixer with a 1/4 inch jack plug on it. Do D.I. boxes use XLR sockets?


    Z.


Children
No Data

Community Rules & Guidelines