Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 8 replies
  • Subscribers 32 subscribers
  • Views 901 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Installation Method

Rhino60
Adding a socket outlet to an existing ring final (mini-trunking surface box)

Do you quote the existing circuit installation method or the addition in the MWC?

It is assumed that they are different.


Colin
Parents
  • 0
    Not an MWC, but an EIC - I have put 4.0/2.5 where the "A-roads" are 4 mm2, but individual spurs have been 2.5 mm2.


    If you just put worst case - i.e. 2.5 mm2, but have a 32 A OCPD, the reader might raise an eyebrow.


    Which makes me wonder what proportion of EICs and MWCs are ever read by anybody other than the author. ??
Reply
  • 0
    Not an MWC, but an EIC - I have put 4.0/2.5 where the "A-roads" are 4 mm2, but individual spurs have been 2.5 mm2.


    If you just put worst case - i.e. 2.5 mm2, but have a 32 A OCPD, the reader might raise an eyebrow.


    Which makes me wonder what proportion of EICs and MWCs are ever read by anybody other than the author. ??
Children
No Data

Community Rules & Guidelines