Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 14 replies
  • Subscribers 32 subscribers
  • Views 1550 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Part E

Chris Pearson
Yes, that's part E, not L, M, or P! ?


Scenario is studding wall between a landing and a bathroom. I don't suppose that anybody in the bathroom will be perturbed by noises on the landing, but one doesn't necessarily want to hear various splashings.


So we have a 2nd floor ring final coming and going in the wall along with the lighting circuit. 


I may be a bit thick, but I don't find the Part E Approved Document easy to interpret. If any wadding is to be put into the wall, then we potentially end up with Reference Method A, in which case the 2.5 mm2 cable is downgraded to 20 A. At this stage I want to ignore the possibility that two legs of a ring should be derated due to grouping.


My feeling is that the requirements of Part E can be met without recourse to wadding, but what I would like to know is whether any of you have encountered this problem, and if so, how you have addressed it. Many thanks. ?
Parents
  • 0

    If you run 16-amp radials in 2.5 mm twin and earth it alleviates all sorts of issues, such as lots of insulation.


    2 x 16 = 32


    with a bit less 2.5 mm twin and earth cable than a ring.



    But two 16A radials, although giving the same theoretical capacity, is a lot less flexible in practice. You can have three 10A loads on a ring without problem, but you can't on two 16A radials without overloading one of them (and having unused capacity on the other).


       - Andy.
Reply
  • 0

    If you run 16-amp radials in 2.5 mm twin and earth it alleviates all sorts of issues, such as lots of insulation.


    2 x 16 = 32


    with a bit less 2.5 mm twin and earth cable than a ring.



    But two 16A radials, although giving the same theoretical capacity, is a lot less flexible in practice. You can have three 10A loads on a ring without problem, but you can't on two 16A radials without overloading one of them (and having unused capacity on the other).


       - Andy.
Children
No Data

Community Rules & Guidelines