Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 14 replies
  • Subscribers 32 subscribers
  • Views 2004 views
  • Users 0 members are here
Options
You may also be interested in
This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

Fuses for showers.

Sparkingchip
From a electric shower installation manual:


Circuit Protection Table

Circuit Protection Device


Unit Rating (@ 240V)

8.5kW

MCB 40A

Cartridge Fuse 45A


9.5kW

MCB 40/45A

Cartridge Fuse 45A


Why a 45 amp cartridge fuse for a 8.5kW shower or for that matter even the 9.5 kW shower?


I presume it must be time related as the 8.5 kW shower will only load a 40 amp fuse to around 90% of its capacity.


How long can cartridge fuses be run at 90% capacity for?


 Andy B.
Parents
  • 0
    I have a pre-used 35-amp cartridge fuse in a Wylex 45-amp fuse holder with a orange base on the side of the dashboard in my van. They were made for 7.5 kW electric showers as the showers were a bit too beefy for a 30-amp fuse or fuse wire.


    Andy B.
Reply
  • 0
    I have a pre-used 35-amp cartridge fuse in a Wylex 45-amp fuse holder with a orange base on the side of the dashboard in my van. They were made for 7.5 kW electric showers as the showers were a bit too beefy for a 30-amp fuse or fuse wire.


    Andy B.
Children
No Data

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines