Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 4 replies
  • Subscribers 32 subscribers
  • Views 403 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Best Buy Multi Function Tester...?

D4G
Hi All,

I'm looking to expand my current electrical/mechanical service role to include inspection and testing, this year I will be sitting the appropriate qualifications.

Bit of an impossible question I suppose but what is the best buy MFT?

Do you need to spend a fortune, are you just paying for a name, do they all do the same thing, any to avoid...??

My current test equipment is all Fluke but there MFTs seem to be more pricey than say Megger or Kewtech?

Any info much appreciated or any links to previous discussions.
Parents
  • 0
    Both Megger and Fluke are broadly in the price range £500..1000 depending on how many knobs and whistles they come with, and are roughly comparable in price and spec. How much you want to pay for the knobs and whistles depends on what you want it for. At a minimum these days you'll want it to be able to do do the DC testing for A- and preferably B-type RCDs. Automatic testing of the endless permutations for RCDs is a bit of must if you need to test a board full of RCBOs. If you're just doing domestic work then writing the results in a notepad is probably ok; for larger installations you might want something that links to a PC and uploads the data. if you're doing 3-phase work then you might want it do do 3-phase rotation testing. Lots of TT work? Then maybe Ra earth rod testing. Etc.
Reply
  • 0
    Both Megger and Fluke are broadly in the price range £500..1000 depending on how many knobs and whistles they come with, and are roughly comparable in price and spec. How much you want to pay for the knobs and whistles depends on what you want it for. At a minimum these days you'll want it to be able to do do the DC testing for A- and preferably B-type RCDs. Automatic testing of the endless permutations for RCDs is a bit of must if you need to test a board full of RCBOs. If you're just doing domestic work then writing the results in a notepad is probably ok; for larger installations you might want something that links to a PC and uploads the data. if you're doing 3-phase work then you might want it do do 3-phase rotation testing. Lots of TT work? Then maybe Ra earth rod testing. Etc.
Children
No Data

Community Rules & Guidelines