This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Switching

Former Community Member
Former Community Member
Somebody has a hallway switch downstairs but they want it switched at the top of the landing to.


problem is they don’t want damage done to any of the walls to put in a typical 2 way, does anyone have a clue in what I could do to give them a 2 way switching? Is there a smart bulb or something?
Parents
  • Hi, ok... so you, obviously, have the switch line at one end now, you only need a T&E to create a 2 way switching. You have the sw/l at one switch now all you need to do is get a feed at the other end and the use the 2 core as 'strappers'... could you do a simple layout of the wiring?


    regards...
Reply
  • Hi, ok... so you, obviously, have the switch line at one end now, you only need a T&E to create a 2 way switching. You have the sw/l at one switch now all you need to do is get a feed at the other end and the use the 2 core as 'strappers'... could you do a simple layout of the wiring?


    regards...
Children
No Data