Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 7 replies
  • Subscribers 32 subscribers
  • Views 525 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Zs measurement on an Off Peak supply.

Jaymack
On an EIC for just metal board changes, one on "On Peak" and one on "Off Peak", what is the current thinking regarding entering Zs for the latter? - using an estimate of (R1 + R2) + Ze or just enter a Limitation, since this is an existing installation ?   


Jaymack
Parents
  • 0
    Is there a 24 hour supply from the same origin - if so this can be used to verify the earthing and supply is OK, and get a Zs for the external part. I;d be tempted to do the rest by calculation or dead tests and add it on.
Reply
  • 0
    Is there a 24 hour supply from the same origin - if so this can be used to verify the earthing and supply is OK, and get a Zs for the external part. I;d be tempted to do the rest by calculation or dead tests and add it on.
Children
No Data

Community Rules & Guidelines