Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 19 replies
  • Subscribers 32 subscribers
  • Views 1766 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Thought provoking PAT question!

Former Community Member
Former Community Member
One for today and probably longer!


Scene: Workshop with woodworking machinery (stationary equipment & fixed equipment).


Scenario: PAT guy "fails" some equipment for not having a means to stop rotation is less than 10 seconds.


Equipment being saws, pillar drill and a bench grinder.


Views?


Regards


BOD


Parents
  • 0
    equally, if it is fed by a flex then it should be tested by someone, if not PAT, and not fixed wiring then who. I agree that machinary needs looking at by someone who knows what is actually needed. Equally, in the workshops here we do have DC braking on the pillar drills, but not the grinder.
Reply
  • 0
    equally, if it is fed by a flex then it should be tested by someone, if not PAT, and not fixed wiring then who. I agree that machinary needs looking at by someone who knows what is actually needed. Equally, in the workshops here we do have DC braking on the pillar drills, but not the grinder.
Children
No Data

Community Rules & Guidelines