Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 78 replies
  • Subscribers 32 subscribers
  • Views 5388 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Help with installation / diagram

Former Community Member
Former Community Member
Hi,


I am after some help with a heated windows installation / diagram - grateful for any input.

Unfortunately, the company supplying the installion went bust and I have been left with a system that doesn't  work (incorrectly designed).

We had a local electrician do the first fix wiring based on the diagrams but he says what has been sent won't work in it's current state and he doesn't have the relevant expertise to adjust it.

We live in a rural area and electricians are not that common especially for something as complex as this.

Rather than post up the diagrams and go into too much detail initially, I just wanted to know if this is a place to ask for advice and if not could anyone point me in the right direction. e.g contact details for an electrical engineer.


Thanks.
Parents
  • 0

    0.5W/m2/degree. This is serious insulation, and with some air change loss quite a problem to design. You could probably get this under ideal conditions with polyurethane board 100 mm thick ]



    An overall U value of 0.15 for walls isn't unknown in some newbuilds these days (yes it means up to about 150mm of PIR/PUR). If the government hadn't got cold feet then something similar would have been in the 2016 building regs. Air change losses are reduced by heat recovery ventilation.

       - Andy.
Reply
  • 0

    0.5W/m2/degree. This is serious insulation, and with some air change loss quite a problem to design. You could probably get this under ideal conditions with polyurethane board 100 mm thick ]



    An overall U value of 0.15 for walls isn't unknown in some newbuilds these days (yes it means up to about 150mm of PIR/PUR). If the government hadn't got cold feet then something similar would have been in the 2016 building regs. Air change losses are reduced by heat recovery ventilation.

       - Andy.
Children
No Data

Community Rules & Guidelines