Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 78 replies
  • Subscribers 32 subscribers
  • Views 5395 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Help with installation / diagram

Former Community Member
Former Community Member
Hi,


I am after some help with a heated windows installation / diagram - grateful for any input.

Unfortunately, the company supplying the installion went bust and I have been left with a system that doesn't  work (incorrectly designed).

We had a local electrician do the first fix wiring based on the diagrams but he says what has been sent won't work in it's current state and he doesn't have the relevant expertise to adjust it.

We live in a rural area and electricians are not that common especially for something as complex as this.

Rather than post up the diagrams and go into too much detail initially, I just wanted to know if this is a place to ask for advice and if not could anyone point me in the right direction. e.g contact details for an electrical engineer.


Thanks.
Parents
  • Former Community Member
    0 Former Community Member
    Hi,


    Further on from my initial post, today I have by chance stumbled upon some diagrams left by the original electrician (never seen before).

    I can only assume they where sent with the changed consumer unit.

    Looking at the diagram it seems like the windows are trying to be grouped together as close to 240v as poss except for the last group (would this be what the transformer was intended for?)

    Would this mean in theory you could swop around the configuration on the same basis? i.e as close to 240v as poss in series?

    Not sure it will make any difference at all :-(


    Ian.



    attachments.zip
Reply
  • Former Community Member
    0 Former Community Member
    Hi,


    Further on from my initial post, today I have by chance stumbled upon some diagrams left by the original electrician (never seen before).

    I can only assume they where sent with the changed consumer unit.

    Looking at the diagram it seems like the windows are trying to be grouped together as close to 240v as poss except for the last group (would this be what the transformer was intended for?)

    Would this mean in theory you could swop around the configuration on the same basis? i.e as close to 240v as poss in series?

    Not sure it will make any difference at all :-(


    Ian.



    attachments.zip
Children
No Data

Community Rules & Guidelines