Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 78 replies
  • Subscribers 32 subscribers
  • Views 5400 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Help with installation / diagram

Former Community Member
Former Community Member
Hi,


I am after some help with a heated windows installation / diagram - grateful for any input.

Unfortunately, the company supplying the installion went bust and I have been left with a system that doesn't  work (incorrectly designed).

We had a local electrician do the first fix wiring based on the diagrams but he says what has been sent won't work in it's current state and he doesn't have the relevant expertise to adjust it.

We live in a rural area and electricians are not that common especially for something as complex as this.

Rather than post up the diagrams and go into too much detail initially, I just wanted to know if this is a place to ask for advice and if not could anyone point me in the right direction. e.g contact details for an electrical engineer.


Thanks.
Parents
  • Former Community Member
    0 Former Community Member
    Hi Mike,


    Many thanks for the detailed reply.

    With regards to the thermostatic controller - I have no details - the PT100 sensors where never ever sent. I was hoping there may be a way of using a wireless thermostat to control the groups somehow?

    The UFH is wet UFH running from a thermal store, so no boiler installed (it does though have a 6kw & 3kw back up immersions fitted).

    I'm just interested in getting the upstairs ones working and so reduce the load somewhat.

    Refering to the diagram - in group 1 it shows R1-2-6 in series (I only need R2)

    Then in group 2 it shows R14-15-16 in series (R14 not needed).

    Would it therefore be feasible to connect R2-15-16 (as R2 very similar to R14) with the already spec'd R17-18-19 then test them as a group?


    Thanks.


    Ian.
Reply
  • Former Community Member
    0 Former Community Member
    Hi Mike,


    Many thanks for the detailed reply.

    With regards to the thermostatic controller - I have no details - the PT100 sensors where never ever sent. I was hoping there may be a way of using a wireless thermostat to control the groups somehow?

    The UFH is wet UFH running from a thermal store, so no boiler installed (it does though have a 6kw & 3kw back up immersions fitted).

    I'm just interested in getting the upstairs ones working and so reduce the load somewhat.

    Refering to the diagram - in group 1 it shows R1-2-6 in series (I only need R2)

    Then in group 2 it shows R14-15-16 in series (R14 not needed).

    Would it therefore be feasible to connect R2-15-16 (as R2 very similar to R14) with the already spec'd R17-18-19 then test them as a group?


    Thanks.


    Ian.
Children
No Data

Community Rules & Guidelines