Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 78 replies
  • Subscribers 32 subscribers
  • Views 5407 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Help with installation / diagram

Former Community Member
Former Community Member
Hi,


I am after some help with a heated windows installation / diagram - grateful for any input.

Unfortunately, the company supplying the installion went bust and I have been left with a system that doesn't  work (incorrectly designed).

We had a local electrician do the first fix wiring based on the diagrams but he says what has been sent won't work in it's current state and he doesn't have the relevant expertise to adjust it.

We live in a rural area and electricians are not that common especially for something as complex as this.

Rather than post up the diagrams and go into too much detail initially, I just wanted to know if this is a place to ask for advice and if not could anyone point me in the right direction. e.g contact details for an electrical engineer.


Thanks.
Parents
  • Former Community Member
    0 Former Community Member
    Hi Andy,


    This is what the guy who did the diagram emailed me initially:

    'There are two groups of heating glass in your installation and they are controlled by two temperature controllers that are working as a thermostat with a sensor on the glass. When the required temperature is reached then the power will be cut off.

    When the sun heats the glass then also the sensor commands the processor to cut off the power'.


    I assumed only 2 of the 3 sensors could be used so the south one for all the windows south & west (controller 1 on consumer board) and either the north or east sensor for those (controller 2 on consumer board) - so just 2 zones which was not what I asked for and pretty impractical - hence wanting to try and hook them up to a room stat on a room by room basis (somehow?)


    Ian.

     


Reply
  • Former Community Member
    0 Former Community Member
    Hi Andy,


    This is what the guy who did the diagram emailed me initially:

    'There are two groups of heating glass in your installation and they are controlled by two temperature controllers that are working as a thermostat with a sensor on the glass. When the required temperature is reached then the power will be cut off.

    When the sun heats the glass then also the sensor commands the processor to cut off the power'.


    I assumed only 2 of the 3 sensors could be used so the south one for all the windows south & west (controller 1 on consumer board) and either the north or east sensor for those (controller 2 on consumer board) - so just 2 zones which was not what I asked for and pretty impractical - hence wanting to try and hook them up to a room stat on a room by room basis (somehow?)


    Ian.

     


Children
No Data

Community Rules & Guidelines