Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 78 replies
  • Subscribers 32 subscribers
  • Views 5416 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Help with installation / diagram

Former Community Member
Former Community Member
Hi,


I am after some help with a heated windows installation / diagram - grateful for any input.

Unfortunately, the company supplying the installion went bust and I have been left with a system that doesn't  work (incorrectly designed).

We had a local electrician do the first fix wiring based on the diagrams but he says what has been sent won't work in it's current state and he doesn't have the relevant expertise to adjust it.

We live in a rural area and electricians are not that common especially for something as complex as this.

Rather than post up the diagrams and go into too much detail initially, I just wanted to know if this is a place to ask for advice and if not could anyone point me in the right direction. e.g contact details for an electrical engineer.


Thanks.
Parents
  • Former Community Member
    0 Former Community Member
    Hi everyone,


    Sorry for the delay - been waiting for a miserable day (hard to believe in Scotland!) and also waiting on a digital thermometer to be delivered.

    Anyway - hooked up one set of windows today directly to test - R2-R15-R16 (no sensors just switch on/off)


    Initial temps : 14C - 18C - 17C

    Temps after 30 mins 25C - 28C - 27C


    The temp of glass outside for R2 was 7.5C - this remained between 7 & 7.5C which was a good indication.

    In comparison, the other hall window which was not connected stayed at approx 13.5C and walking between the 2 was quite noticeable.


    I've also found a small note in electricians stuff which say safe operating temp not to exceed 40C


    Thanks.


    Ian.
Reply
  • Former Community Member
    0 Former Community Member
    Hi everyone,


    Sorry for the delay - been waiting for a miserable day (hard to believe in Scotland!) and also waiting on a digital thermometer to be delivered.

    Anyway - hooked up one set of windows today directly to test - R2-R15-R16 (no sensors just switch on/off)


    Initial temps : 14C - 18C - 17C

    Temps after 30 mins 25C - 28C - 27C


    The temp of glass outside for R2 was 7.5C - this remained between 7 & 7.5C which was a good indication.

    In comparison, the other hall window which was not connected stayed at approx 13.5C and walking between the 2 was quite noticeable.


    I've also found a small note in electricians stuff which say safe operating temp not to exceed 40C


    Thanks.


    Ian.
Children
No Data

Community Rules & Guidelines