This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Help with installation / diagram

Former Community Member
Former Community Member
Hi,


I am after some help with a heated windows installation / diagram - grateful for any input.

Unfortunately, the company supplying the installion went bust and I have been left with a system that doesn't  work (incorrectly designed).

We had a local electrician do the first fix wiring based on the diagrams but he says what has been sent won't work in it's current state and he doesn't have the relevant expertise to adjust it.

We live in a rural area and electricians are not that common especially for something as complex as this.

Rather than post up the diagrams and go into too much detail initially, I just wanted to know if this is a place to ask for advice and if not could anyone point me in the right direction. e.g contact details for an electrical engineer.


Thanks.
Parents
  • That sounds quite sensible - clearly the outer pane is not the heated one, and it is well cooled, and the inner ones are being warmed  up  as they should.

    I am not sure if it is really enough heat for your case, or if it will need supplementing, but you have a way forward - a simple room thermostat in series will do the main control, and ideally some sort of overheat trip on the window that runs hottest to knock it off if it gets too much.
Reply
  • That sounds quite sensible - clearly the outer pane is not the heated one, and it is well cooled, and the inner ones are being warmed  up  as they should.

    I am not sure if it is really enough heat for your case, or if it will need supplementing, but you have a way forward - a simple room thermostat in series will do the main control, and ideally some sort of overheat trip on the window that runs hottest to knock it off if it gets too much.
Children
No Data