Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 5 replies
  • Subscribers 32 subscribers
  • Views 363 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Additional heating zone

Former Community Member
Former Community Member
So 


I’ve to add a new zone into an existing heating system.


which currently has a 3 channel programmer

- Hot water

- House heating

- UFH


now I was gonna put a new 4 channel programmer in with a Timeguard TRT037N, wireless stat for the new zone


Am I right that to make this work, I’ll take a permanent Live & Neutral to my new receiver, also take a Channel Live and put into the Common terminal on the receiver with the outgoing onto the brown of my valve?
Parents
  • Former Community Member
    0 Former Community Member
    Managed to power up and all was well.


    Now I have a fresh question, how would you tie in a 2 port valve into a UFH manifold?


    I looked at the one on the job which looked to be Salus KL06, and PL07 attachment.


    How would you make this work? 


    obviously Grey/Earth/Neutral on the port valve, brown would be connected where? Then orange is the boiler core so wouldn’t be needed in the manifold?


    The Live sent from the channel programmer would be connect to the incoming Live in the manifold?


    Tried to look for a wiring diagram online so I could see how it would tie in but with no luck.
Reply
  • Former Community Member
    0 Former Community Member
    Managed to power up and all was well.


    Now I have a fresh question, how would you tie in a 2 port valve into a UFH manifold?


    I looked at the one on the job which looked to be Salus KL06, and PL07 attachment.


    How would you make this work? 


    obviously Grey/Earth/Neutral on the port valve, brown would be connected where? Then orange is the boiler core so wouldn’t be needed in the manifold?


    The Live sent from the channel programmer would be connect to the incoming Live in the manifold?


    Tried to look for a wiring diagram online so I could see how it would tie in but with no luck.
Children
No Data

Community Rules & Guidelines