Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 5 replies
  • Subscribers 32 subscribers
  • Views 362 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Additional heating zone

Former Community Member
Former Community Member
So 


I’ve to add a new zone into an existing heating system.


which currently has a 3 channel programmer

- Hot water

- House heating

- UFH


now I was gonna put a new 4 channel programmer in with a Timeguard TRT037N, wireless stat for the new zone


Am I right that to make this work, I’ll take a permanent Live & Neutral to my new receiver, also take a Channel Live and put into the Common terminal on the receiver with the outgoing onto the brown of my valve?
Parents
  • Former Community Member
    0 Former Community Member

    Sparkymark:

    That’s interesting.

    All of the underfloor heating I’ve worked with the ufh wiring centre had connections to control the valve, but doesn’t seem to be on this one.

    Assuming you have non-programmable room stats then yes I think channel live to the wiring centre.

    I think I would then use the PL07 to control the valve so brown to the boiler on terminal, and then the valve to switch the boiler so orange to a separate core back to the boiler.

    Does seem a bit long winded though and not familiar with this system, so stand to be corrected...




    Yeah I found this very strange to.


    so going to the PL07 terminals, 1 and 2, brown from valve into 1, then connect orange into terminal 2 which goes back to the boiler?


    Then I assume terminals 3 & 4 are the pump? Live & Neutral?

Reply
  • Former Community Member
    0 Former Community Member

    Sparkymark:

    That’s interesting.

    All of the underfloor heating I’ve worked with the ufh wiring centre had connections to control the valve, but doesn’t seem to be on this one.

    Assuming you have non-programmable room stats then yes I think channel live to the wiring centre.

    I think I would then use the PL07 to control the valve so brown to the boiler on terminal, and then the valve to switch the boiler so orange to a separate core back to the boiler.

    Does seem a bit long winded though and not familiar with this system, so stand to be corrected...




    Yeah I found this very strange to.


    so going to the PL07 terminals, 1 and 2, brown from valve into 1, then connect orange into terminal 2 which goes back to the boiler?


    Then I assume terminals 3 & 4 are the pump? Live & Neutral?

Children
No Data

Community Rules & Guidelines