Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 46 replies
  • Subscribers 32 subscribers
  • Views 6590 views
  • Users 0 members are here
Options
You may also be interested in
This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

Immersion heater - economy 7 timer wiring

Former Community Member
Former Community Member
Hello,


I have a honeywell st6400c controller and an immersion heater. 

My heater has 2 switches, off and on peak. My concern is that the heating works only with both switches on. Even if its set to trigger at off peak time only, which it does, both switches light up and if I switch off the onpeak one, the heating stops even tho the offpeak is still lit (testing this at off peak hours ofc). Is this correct ? does this not use much more electricity? I was monitoring this and Im sure it goes against the "night" hours, but my worry is that it uses much more power than it should.

Thank you for your advice

Tom
Parents
  • 0
    Tom Luknar:

    btw, theres a little box attached to each radiator with a power socket switch which runs the radiators once turned on via the controller. 


    ? Are you actually on an Economy Seven tariff and if so what rates are you paying?


    Andy B.


Reply
  • 0
    Tom Luknar:

    btw, theres a little box attached to each radiator with a power socket switch which runs the radiators once turned on via the controller. 


    ? Are you actually on an Economy Seven tariff and if so what rates are you paying?


    Andy B.


Children
No Data

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines