Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 31 replies
  • Subscribers 32 subscribers
  • Views 7546 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

New EICR - "No earth bond to some socket boxes: C2"?

Former Community Member
Former Community Member
I have a new EICR which has the observation "No earth bond to some socket boxes: C2".


I have checked continuity between all faceplate mounting screws and the earth of the socket. They are all connected, i.e. the back box is at least earthed by the screw if not with a tail internally (I have not removed the front plates of any sockets). The earth of each socket is connected to the ring.


While it is best practice, is it a requirement of the regulations that a tail is connected internally?


many thanks



Parents
  • 0
    True, it’s cross section rather than area.


    And of course, if it is a healthy ring the CPC is doubled up.


    But you can find  the single cable of a 2.5/1.0 twin and earth socket ring circuit “spur” quite legitimately wired directly into the fuse holder protected by a 30 amp fuse wire.
Reply
  • 0
    True, it’s cross section rather than area.


    And of course, if it is a healthy ring the CPC is doubled up.


    But you can find  the single cable of a 2.5/1.0 twin and earth socket ring circuit “spur” quite legitimately wired directly into the fuse holder protected by a 30 amp fuse wire.
Children
No Data

Community Rules & Guidelines